A Low-Noise 'Urban' 10 element LFA Yagi for 50MHz
Revised 27th August 2009 V1.0
The LFA design has a patent pending and all G0KSC designs are copyright. Any ham can build for their own use or those of a friend. Where profit or commerical gain exists, express permission of G0KSC must be sought.
If you suffer with noise from living in the city or just don't want to hear stations behind or to the side of you try this, another low-noise antenna from G0KSC
Like the 9 element version before it, this antenna has been designed with light-weight in mind and optimum performance through single piece elements. It has all the common attributes of an LFA Yagi, Flat SWR,Excellent Gain, fantastic Front to Back ratio and suppressed unwanted lobes.
A True DX'ers antenna and at more than 17 metres long, not for every ham in the neighbourhood! However, this antenna does have a massive .6dB advantage over the smaller 9 element version and at these levels of gain, that can make quite a difference.
Both European and UK/USA versions are available. Build and construction details are below and EZNEC files are available for download on the download page.
The 10el 50MHz LFA at CT1HZE
The 10el 6m LFA at G0VHF/P 2010 for the RSGB 6M Trophy - Built by G0KSC
Download both the European and UK/USA EZNEC files HERE
The 10 element LFA Yagi for 50MHz. How it will look when completed
PLEASE NOTE:
- This antenna WILL NOT show the true SWR in any antenna modelling package unless you are using one which uses the latest NEC4 calculation engine
- There are two sets of measurements listed below. One uses imperial sizes, the other uses metirc sizes. Ensure you use the correct one for the material you have
- 'within one or two millimetres' Will not do! take the time to ensure you get the spacing ant element lengths as close as you possibly can to the measurements below to ensure good, solid performance
- Please read the 'how to make the LFA Loop' page here
- Please do not alter segmentation or try to 'tune' the antenna unless you have nec4 or better. SWR will not read true within anything else
Download both the European and UK/USA EZNEC files HERE
Performance European Version UK/USA Version
Forward Gain: 15.11dBi at 50.150MHz 15.1dBi at 50.150MHz
Front to Back Ratio: 30.25dB at 50.150MHz 30.54dBi at 50.150MHz
Peak Gain: 15.13dBi 15.12dBi
Peak F/B: 32.75dB 32.87dB
Bandwidth: 500KHz below 1.1:1 500KHZ below 1.1:1
Build Dimensions for European Version - If you need 12mm Loop sizing mail me
Element Spacing Half element Length (m) Element Notes
Reflector 0 1.482 10mm Diameter tube or solid rod
DE1 .385 1.228 13mm Tube
DE2 .945 1.228 13mm Tube
D1 1.792 1.386 10mm Diameter tube or solid rod
D2 3.45 1.355 10mm Diameter tube or solid rod
D3 5.459 1.331 10mm Diameter tube or solid rod
D4 7.768 1.313 10mm Diameter tube or solid rod
D5 10.173 1.297 10mm Diameter tube or solid rod
D6 12.611 1.281 10mm Diameter tube or solid rod
D7 15.129 1.256 10mm Diameter tube or solid rod
D8 17.332 1.246 10mm Diameter tube or solid rod
Notes:
DE1 and DE2 are joined at the ends by 10mm tube
Feed point is the centre of DE1
Please read the 'how to make the LFA Loop' page here
SWR Plot for the European version of the G0KSC 10el 50MHz LFA Yagi
Download both the European and UK/USA EZNEC files HERE
Build Dimensions for UK/USA Version
Element Spacing Half element Length (M) Element Notes
Reflector 0 1.483 3/8 inch Diameter tube or solid rod
DE1 .385 1.228 1/2 inch Tube
DE2 .945 1.228 1/2 inch Tube
D1 1.794 1.387 3/8 inch Diameter tube or solid rod
D2 3.45 1.356 3/8 inch Diameter tube or solid rod
D3 5.459 1.332 3/8 inch Diameter tube or solid rod
D4 7.768 1.314 3/8 inch Diameter tube or solid rod
D5 10.173 1.298 3/8 inch Diameter tube or solid rod
D6 12.611 1.282 3/8 inch Diameter tube or solid rod
D7 15.129 1.257 3/8 inch Diameter tube or solid rod
D8 17.332 1.247 3/8 inch Diameter tube or solid rod
Notes:
DE1 and DE2 are joined at the ends by 3/8 tube
Feed point is the centre of DE1
Please read the 'how to make the LFA Loop' page here
SWR Plot for the UK/USA version of the G0KSC 10el 50MHz LFA Yagi
Antenna Elevation Plot
European version Azimuth Plot
UK/USA Elevation Plot
As always, any questions please ask!
Justin G0KSC