G0KSC Antennas
Shop
11el 50MHz OWA Yagi
OWA Yagis

11el 50MHz OWA Yagi

Gain
15.25 dBi
F/B
33.38 dB
Elements
11
Specifications

Performance

Gain
15.25 dBi
Front-to-back
33.38 dB
Elements
11
Impedance
50 Ω
Dimensions

Element dimensions

Element dimensions

Compare element positions and lengths with the original design before building; these imported measurements have not been individually verified.

Element Position
Ref 0 mm
D1 1.065 mm
D2 2.184 mm
D3 3.933 mm
D4 5.93 mm
D5 8.204 mm
D6 10.603 mm
D7 13.083 mm
D8 15.636 mm
D9 17.65 mm
Ref 1.48 mm
Driven 1.4615 mm
D1 1.393 mm
D2 1.3715 mm
D3 1.343 mm
D4 1.3205 mm
D5 1.302 mm
D6 1.2855 mm
D7 1.2705 mm
D8 1.262 mm
D9 1.281 mm
Ref 0 mm
D1 1.065 mm
D2 2.184 mm
D3 3.933 mm
D4 5.93 mm
D5 8.204 mm
D6 10.603 mm
D7 13.083 mm
D8 15.636 mm
D9 17.65 mm
Ref 1.4805 mm
Driven 1.4625 mm
D1 1.393 mm
D2 1.372 mm
D3 1.3435 mm
D4 1.321 mm
D5 1.3025 mm
D6 1.286 mm
D7 1.271 mm
D8 1.2625 mm
D9 1.2815 mm
Modelled performance

Plots

About this design

G0KSC SC0611L 11el 50Mhz OWA Yagi Antenna with a 17.65 Metre Length Boom

Premium commercial versions of this antenna at Innovantennas

Please read the whole page, there are several versions of this antenna listed.

If you like the look of this antenna but need tapered elements or different diameter elements, contact me

This antenna has been redesigned and represents what i beleive to the the 'ideal boom length' for an OWA direct feed 50Ohm Yagi. This can be seen in the model in the super flat SWR, the high levels of F/B ratio along with the excellent gain and pattern.

The model below is designed with 12.7mm / 1/2 inch elements and also a 12mm element version below. If you require a version of this antenna with another diameter wire, Email me and I will remodel. It is NOT POSSIBLE to simply resize the elements when using a different diameter wire and get the best performance possible. Element positions also need to change for the ideal antenna to be achieved again. Please read all the way down this page, there are other versions of this antenna using tapered elements too. As I have more requests, I will remodel in other element diameters and tapers and pulbish those too.

Enjoy the antenna and if you build, Please Send me photos!

Dimensions in Metres1/2 inch element version

Element spacing:

  • Ref =       0
  • Driven =  .757
  • D1 =       1.065
  • D2 =       2.184
  • D3 =       3.933
  • D4 =       5.930
  • D5 =       8.204
  • D6 =      10.603
  • D7 =      13.083
  • D8 =      15.636
  • D9=       17.650

Element sizes per element half:

  • Ref =       1.480
  • Driven =   1.4615
  • D1 =        1.393
  • D2 =        1.3715
  • D3 =        1.343
  • D4 =        1.3205
  • D5 =        1.302
  • D6 =        1.2855
  • D7 =        1.2705
  • D8 =        1.262
  • D9 =        1.281

Performance figures @ 50.150Mhz:

  • Froward Gain: 15.25dBi free space
  • Front to Back: 33.38dB
  • Stacking distances: 7.5 to 10m. 9m ideal pattern/performance balance
  • Forward Gain at 9m stack: 18.06dBi
  • Front to Back at 9m Stack: 29.74dB

Dimensions in Metres12mm element version

Element spacing:

  • Ref =       0
  • Driven =  .757
  • D1 =       1.065
  • D2 =       2.184
  • D3 =       3.933
  • D4 =       5.930
  • D5 =       8.204
  • D6 =      10.603
  • D7 =      13.083
  • D8 =      15.636
  • D9=       17.650

Element sizes per element half:

  • Ref =       1.4805
  • Driven =   1.4625
  • D1 =        1.393
  • D2 =        1.372
  • D3 =        1.3435
  • D4 =        1.321
  • D5 =        1.3025
  • D6 =        1.286
  • D7 =        1.271
  • D8 =        1.2625
  • D9 =        1.2815

Performance figures @ 50.150Mhz:

  • Froward Gain: 15.23dBi free space
  • Front to Back: 33.02dB
  • Stacking distances: 7.5 to 10m. 9m ideal pattern/performance balance
  • Forward Gain at 9m stack: 18.06dBi
  • Front to Back at 9m Stack: 29.74dB

Element diameter:

Each element is made out of single piece 1/2 inch (12.7mm) aluminum tubing Each element half length needs to be doubled in order to gain your total element size.

NOTE:

You can build this antenna with 13mm diameter tubing using the same parameters above. Slightly higher front to back ratio and forward gain will be seen along with a narrower SWR curve. For other element diameters, please Email me.

The Azimuth plot of this fantastic 50 Ohm Split dipole antenna

The super-clean elevation plot

Elevation plot of this antenna 20m (66') above ground.

And finally the fantastic SWR curve - it does not get better than this on a 50Ohm Split dipole Yagi!

For construction information see 'G0KSC insulators' and the UKSMG article titled 'Building a Yagi'  from the main menu on the home page.